UAV Applications for Power Industry Subcommittee
Scope:
Key Technologies of UAS in :
Power planning and design, construction management, operation and maintenance inspection, environmental assessment and water protection, digital twin power grid construction and other fields.
Standard Management:
Standard system construction and maintenance, international standard project review, standard research and compilation process management, standard application.
Active projects:
1. P1936.6 Standard for UAS Oblique Photogrammetry of 110 kV and Above Power Transmission and Transformation Projects Survey and Design
2. P1936.7 Standard for Mesh Deployment of Multi-rotor Unmanned Aircraft Systems for Inspection of Electrical Power Facilities
3. P1936.8 Standard for Photovoltaic Power Station Monitorning by Unmanned Aircraft System
4. P1936.9 Standard for Technical Requirements for Electric Heavy-lift Unmanned Aircraff Systems for Power Grid Material Lifting
5. P1936.10 Recommended Practice for Use of an Electric Heavy-lift Unmanned Aircraft Systems for Power Grid Material Lifting
6. P1936.11 Standard for Requirements of Laying Out Pilot Ropes by UAS for Overhead Power Line Installations
7. P1936.12 Standard for Verification of Pilot Line Deployment Devices Based on a Unmanned Aircraft System for Overhead Power Line Installations
8. P1936.13 Recommended Practice for Image Collection of Inspection for Overhead Distribution Lines by UAS
9. P1936.14 Standard for Multi-Spectral Scanning of Overhead Transmission Lines by Unmanned Aircraft Systems
10. P1936.15 Standard for a Transmission Protocol for Equipment Status and Control Data for Remote Sensing Networks that Use Unmanned Aerial Systems
11. P1936.16 Standard for the Inspection of Overhead Transmission Lines by Vertical Take-off and Landing Fixed-wing Unmanned Aircraft Systems
12. P1936.17 Standard for Multi Unmanned Aircraft System(MUAS)Trajectory Planning for Collaborative Inspection of Overhead Power Lines
13. P1936.18 Standard for Unmanned Aerial System-Based Multi-Sensor Data Fusion for Power Line Anomaly Detection Applications
14. P1936.19 Recommended Practice for Image Encoding and Decoding in Unmanned Aerial Vehicle Inspection of Overhead Transmission Lines
15. P1936.20 Standard for Identification of Electrical Fault Risk in Power Lines using Unmanned Aircraft System(UAS)Light Detection And Ranging(LiDAR)
16. P1936.21 Standard for unmanned aerial vehicle(UAV)inspection system of indoor power grid equipment -Part 1:General requirements